CUSTOMERS
  TECHNICAL SPECIFICATIONS - HEAVY DUTY FLOORING
Car Park System
ESD Flooring
Heavy Duty Flooring
 
EP - coating (indoor), tough hard, smooth
Substrate: Concrete, cement screed
Application of a coating system in accordance to the use. The epoxy system is free of nonylphenol and shows a coloured, gloss surface.
System thickness: approx. 2.0 mm (without epoxy screed) In case of rising moisture penetration AB-POX 010 must be used (see technical data sheet).

  Specification / product description
Pos. 1 The substrate (concrete > C 20/25) must be prepared by a dust-free pre-treatment, e.g. Blastrac® shot blasting and vacuum cleaning. Observe instructions of use and technical specifications. Pull off strength: 1.5 N/mm², maximum moisture content 4 % by weight (need to be proven).
Pos. 1.1 Remove / equalize the existing unevenness at the surface by grinding or milling and Blastrac® shot blasting.
To be carried out on instruction of the supervisor: 1 - 3 mm.
Pos. 2 Priming layer onto the prepared surface with a 2-component standard epoxy resin; flash point > 90ºC. The product is free of nonylphenol.
AB-POX 002 (1 : 1 filled with fine fillers), colourless.
Consumption: approx. 300 g/m², lightly sprinkled with clean dry quartz sand Ø 0.4 - 0.8 mm (approx. 0.5 kg/m²).
Pos. 3 (OPTION) Epoxy screed layer onto the primed surface with a 2-component standard epoxy resin; flash point > 90ºC. The product is free of nonylphenol.
Approx. 1 : 9 filled with clean dry quartz sand (special grading curve).
AB-POX 002, colourless.
Consumption: approx. 10 kg/m² (approx. 5 mm; depending on the substrate).
Pos. 3a (always on top of the EP-screed) Coating layer (to fill the pores) onto the prepared epoxy screed with a 2- component standard epoxy resin; flash point > 90ºC. The product is free of nonylphenol. AB-POX 002 (1 : 1 filled with fine fillers), colourless.
Consumption: approx. 200 g/m², lightly sprinkled with clean dry quartz sand Ø 0.4 - 0.8 mm (approx. 0.3 kg/m²)
Pos. 4 The contour of the surface following coating layer with a 2-component, tough hard, coloured epoxy resin. The product is free of nonylphenol.
AB-POX 465 (1 : 1 filled with special graded fine fillers), sky blue approx. RAL 5015.
Consumption: approx. 3.2 kg/m2.
Pos. 5 Rubbish, drums, residues and debris must be disposed by the performer in accordance to the local regulations. Keep the building site tidy.

Edition: 03/2012. Before use, please check that this is the actual edition of the Technical Data Sheet. The information contained in this Technical Data Sheet is of a general nature and is provided in good faith and we accept no liability for errors or omissions. Because use and application of this product are out of our control and depend, concerning substrate, load and method of application, on the particularities of the individual case, our advice, verbal, written or based on tests, does not exempt the applicator from testing the suitability of the products for the intended use.


   
  Home | Company Profile | Markets | Products | Projects | Unique Offering | Certifications | Green Initiatives | Contact | Sitemap | News | Terms and Conditions | Privacy Policy

© Chowgule ABP Coatings (India) Pvt Ltd.
 
Home Home